Teardrop flags

Price range: 70,00 € through 108,00 € excl. VAT

Teardrop flag with custom print. Choose size R220, R310 or R430 and either standard 115 g flag fabric or Mesh flag fabric. The set includes the flag, pole and carry bag; the flag base is sold separately.

Standard flag fabric 115 g – the standard option.
Mesh flag fabric – breathable mesh fabric.

SKU: RANNALIPUD Category: Brand:
Plate base for flag poleFork base for flag poleMetal ground spike for flag poleGround spike for flag pole50 cm spike base for promotional flagCross base for flag poleWater bag weight for flag baseCar wheel flag base

Teardrop flags with your logo – R220, R310 and R430

Teardrop flags, also known as beach flags, are promotional flags with a curved top and your own logo or design for shop fronts, trade fairs and outdoor events. Choose R220, R310 or R430: the total height with pole is 2.2 m, 3.1 m or 4.3 m respectively. The set includes the printed flag, pole and carry bag; you choose the flag base separately according to the location.

Where are teardrop flags used?

  • On the beach and at beach sports events: the flag helps mark the location of the organiser, sponsor or service point.
  • At outdoor events and festivals: a custom-printed flag guides visitors to the entrance or sales area.
  • Outside shops and restaurants: the flag brings your name or campaign into the view of passers-by.

Choose a flag base according to the surface: a soft-ground base is suitable for sand or grass, a cross base or plate base for hard surfaces.

Sizes

Model Flag size Height with pole
R220 850 × 1800 mm 2200 mm
R310 850 × 2600 mm 3100 mm
R430 850 × 3000 mm 4300 mm

R220 is the lowest of the three models, R310 the medium and R430 the tallest. Choose the model based on how far away the flag needs to be visible and how much space there is at the location.

Flag fabric material

When ordering a teardrop flag, you can choose between two materials:

  • Standard flag fabric 115 g is the standard option with an even surface for custom printing.

Choose the size and fabric on the product page: the price of the selected set is shown before adding it to the quote basket.

Close-up of Mesh flag fabric: openings that let air through in blue and white printed fabric

Mesh flag fabric is a mesh-like fabric with openings that lets air through. The airflow helps reduce the wind load on the flag fabric and pole compared to standard flag fabric. It is suitable for windier locations.

Click the image to see the fabric structure enlarged.

The set includes

  • custom digitally printed flag in the selected material;
  • flag pole suited to the model;
  • carry bag.

The flag is printed on one side with show-through printing: the design is visible from both sides, mirrored on the back. Flag base must be chosen separately according to the location. A cross base or plate base is suitable for hard surfaces, a ground spike or spike base for soft ground. For larger flags and outdoor use we recommend an extra weight.

Production and design

The usual production time after design approval is about one week. An express order in 2–3 working days must be agreed in advance. Ask for a custom quote when ordering several flags.

Design template R220 | Design template R310 | Design template R430

Technical data: weight 1.5–2.5 kg depending on the model; package size 120 × 22 × 5 cm; 2-year warranty.

Frequently asked questions about teardrop flags

Is a teardrop flag also suitable for a shop front or a trade fair?

Yes, a teardrop flag is a custom-printed promotional flag that can also be used outside a shop, at a trade fair or at a sports event. It does not have to be used on a beach. What matters is choosing a height suitable for the space and a base suitable for the surface.

Should I choose R220, R310 or R430?

The total height with pole is 2.2 m for the R220, 3.1 m for the R310 and 4.3 m for the R430. Indoors, check the ceiling height and leave room for installation. Outdoors, consider visibility, pedestrian movement and anchoring options. The flag fabric size is a separate measurement and should not be confused with the total height of the pole.

How do I secure a teardrop flag on sand or a hard surface?

On sand or grass, choose a suitable soft-ground base, such as a spike base or ground spike; before installation, make sure the ground holds the base firmly. On a hard surface, use a suitable cross base or plate base and an extra weight if needed. The flag base must be chosen separately. Mesh flag fabric lets air through, but it does not replace anchoring. In strong wind or a storm, take the flag down.

How do I order a teardrop flag with my own design?

Choose the model, fabric material and quantity and add the flag to the quote basket together with a suitable base. Add your logo or design, the location and the desired deadline. File requirements and design templates for the models can be found on the “Design requirements” tab. With one-sided show-through printing, the design on the back is mirrored. To compare other shapes, see feather flags and rectangular promotional flags.

Teardrop flags: checking the weather on the day of installation

Before installing on a beach or other open area, check the Estonian Environment Agency's weather warnings. Consider the location and the ground and keep an eye on the flag during the event. The Mesh option does not replace a suitable base or following the pole's instructions.

Teardrop flags: R220, R310 and R430; total heights 2.2, 3.1 and 4.3 m; flag, pole and carry bag
An overview of technical information to help you choose the right model and location.

Flag design requirements

The flag is printed on 115 g flag fabric on one side with show-through printing. The design is visible from both sides, but mirrored on the back of the flag.

Submitting a finished design

  • colour space: CMYK;
  • file format: PDF/X-1a;
  • scale: 1:1;
  • please provide logos and texts as vector graphics;
  • all fonts must be converted to outlines;
  • the recommended resolution of photos at final size is 100–150 dpi;
  • please do not use overprint;
  • guides, dimensions and cut lines on the design template must not be changed.

Teardrop flag design templates

Download the PDF template for the selected flag model and place logos, texts and other design elements on it.

Need help with the design?

We can also create the flag design for you. Send us your logo and other design elements as vector files (PDF, AI, EPS, SVG or CDR), the desired texts, colour codes and a description of where and how to place the elements. We will send you the finished design for checking and approval before production.

Send larger files via WeTransfer to the email address info@telgiekspert.ee.

Send design files via WeTransfer

Size

R220, R310, R430

Flag fabric material

Standard flag fabric 115 g, Mesh fabric

Reviews

There are no reviews yet.

Be the first to review “Teardrop flags”

Your email address will not be published. Required fields are marked *

Scroll to Top